Problems to be considered in outdoor court lighting

Outdoor stadium lighting is very different from indoor stadium lighting, such as the waterproof ability of lights and the windproof grade of light poles.

Outdoor stadium lighting spillage problem

When designing the lighting of some indoor stadiums, the light reflection ability of the roof will be considered, and the reflected light will be fully utilized. Even in some indoor stadium design schemes, in order to make the light more uniform, the light will reach the ceiling, and then the light will be reflected to illuminate. Bright field. Outdoors, however, there are no ceilings and walls to reflect the light from the fixtures, and it's easy to illuminate the surroundings of the court, a phenomenon known as spill light that illuminates areas of the design that shouldn't be lit. The generation of spill light means that the outdoor stadium lighting is not cost-effective enough, and part of the light is wasted. In addition to wasting resources, spill light can easily cause spill light interference. If the light shines into the sky, it will destroy the quiet night sky. If it shines on the surrounding residential areas, it will interfere with the normal rest of residents.

Therefore, outdoor stadium lighting needs to choose lamps with precise light control, such as the special lamps for Hisine Stadium, which can accurately control the light, and have narrow, medium, wide and other angles to choose from, improve the utilization rate of light, and project the original outside the venue as much as possible. The light effect is projected into the venue, which improves the lighting efficiency.
Layout of outdoor stadium lighting poles

The installation methods of lamps for outdoor stadium lighting are mainly installed on horse tracks and light poles. The installation on the horse track mainly occurs in stadiums with auditoriums, and the lamps are installed on the horse track on the auditorium. The rest is basically installed on the pole. The height of the light pole of the basketball court is basically between 8 and 15 meters; the height of the light pole of the volleyball court is basically between 8 and 15 meters; the height of the light pole of the five-a-side football field is basically between 8 and 15 meters; The height of the light poles of the field is basically between 8 and 15 meters; the height of the light poles of the seven-a-side football field is basically between 12 and 20 meters; the height of the light poles of the eleven-a-side football field is basically between 15 and 25 meters; The height of the poles of the field is basically between 25 and 35 meters. It can be seen that the outdoor stadium lighting poles are not low, so the outdoor stadium lighting should not be too heavy, the windward surface should not be too large, and the number of lamps hanging on one light pole should not be too many. Hi Robot high mast light have high light efficiency, efficient heat dissipation, light body structure, easy installation and reduced transportation costs.

Demand for outdoor stadium lighting fixtures

The stadium lamps are installed outdoors, and the wind, rain and sun exposure are inevitable. It is only a big test for the lamps. In the lighting industry, there are clear testing standards for waterproof and dustproof, that is, the protection level IP. IP is the abbreviation of Ingress Protection Rating (or International Protection code), which defines the protection ability of an interface to liquid and solid particles. IP is followed by 2 digits, the first one represents the solid state protection level, ranging from 0 to 6, representing protection from large particles to dust, respectively; the second one represents the liquid protection level, ranging from 0 to 8, representing protection against Protection from vertical water droplets to underwater pressure situations. The higher the number, the stronger the ability. The protection level of Huaxia Beidouxing Stadium lamps can reach IP67, which can fully cope with the outdoor environment. The interpretation of IP67 is, protection against dust inhalation (overall protection against contact, protection against dust penetration), and protection against short-term immersion (anti-immersion). At present, the highest realization in the wiring industry is IP68 level.

In addition, the shell of Hi Shoot stadium lamps is made of aluminum die-casting, and the surface is sprayed with outdoor pure polyester plastic powder. . The bracket is formed by bending imported cold-rolled plate, and the screws and nuts are all made of 304 stainless steel, which is corrosion-resistant, acid and alkali resistant, high tensile strength and heat resistance and low temperature strength.