What should be paid attention to installing LED High Bay lights?

Regarding the product advantages of led high bay lights, we have given you a brief explanation before. Let's take a look at the relevant explanations about where the energy-saving advantages of led high bay lights are mainly reflected.

The light efficiency of LED high bay lights is higher and better. LED high bay lamps have certain advantages in terms of light efficiency, and the ability to convert electrical energy into light energy is better than other traditional light sources. The directionality of led high bay lights is one of the important features. The structure of led high bay lamps is different from other light sources. Its light has a certain directionality, and it is impossible to emit light to the surroundings. LED concentrates the light on the illuminated surface, which naturally improves the efficiency.

Through the analysis of the above two aspects, we can know that compared with other types of products, led high bay lamps have certain advantages in use, especially in terms of energy saving. The above is the relevant description of the energy-saving advantages of led high bay lamps. Remember to pay attention to our website to learn more.

Although high-power high bay lamps are also a type of high bay lamps, there is no difference whether they are installed or not. Today we will take a look at the installation points of high-power high bay lamps.

At the position where the high bay light needs to be installed, the hook is pre-set. It should be noted that the hook should be used together with the ring, and the load capacity of the hook should exceed 30Kg when installing. And do a good job of waterproof and insulation treatment; after the installation is completed, turn on the power supply and observe whether the high bay lamp can work normally. The main points of the installation of high-power high bay lamps are as follows:

1. Tighten the lifting ring, the lifting ring is M20 thread.

2. Put the ring into the hook and place it smoothly.

3. Pay attention to the working environment temperature and storage.

4. When installing the lamp, the wiring and wiring should be sealed to prevent leakage.

5. When the external power line is connected, it is necessary to take corresponding waterproof and leak-proof measures.

6. When the lamps are used, they must not violate the fire prevention regulations.

7. Please find a professional electrician for installation, and use a 0.75mm2 three-core cable to connect the red wire, which is the so-called live wire, the blue wire is the neutral wire, and the yellow wire is the ground wire.

High bay lights are industrial electronic products, so they also need to be installed in designated locations. Before installation, it is necessary to check the integrity of high bay lights and the completeness of accessories. The connection wires on the high bay lamps can pass through the drill holes and the connection wires behind the lamps can be fixed with wire clamps, and the fixation must be firm. When installing high bay lamps, it is necessary to require the installer to hold a professional electrician certificate, so as to prevent damage to the high bay lamps due to installation errors.

After the installation of the high bay lamp is completed, a power-on test is required. If a single high bay lamp cannot be lit, it is necessary to check the circuit or the problem of the high bay lamp. After ensuring that all high bay lamps are normally lit, the installation of the high bay lamp is considered complete. To ensure that the power cord of the high bay light has a sufficient length, do not suffer from tension or tangential force of the pneumatic ball valve, prevent excessive tension when installing the high bay light connection, do not make the connection knotted, pay attention to the difference between the output connection, Do not mix with other lamps.