With the rapid economic development, port terminals are the most important for transportation. Port terminals play an important role in berthing, loading and unloading cargo, and traveling to and from passengers. For ports that operate 24 hours a day, high-quality port lighting is essential. At present, floodlights installed in ports generally suffer from high light attenuation, low power factor, high energy consumption, and low color rendering index. And there is no automatic control.
How to choose harbor lighting
Precautions for the selection of port and wharf lighting fixtures:
Since the height of the gantry crane is generally tens of meters, it has the characteristics of wide adaptability and large lighting range. In order to meet the illumination requirements during operation, the general port The power must be at least 500W.
2.Long service life
Because the height of the gantry crane is very high, it is difficult and inconvenient to repair the lamps on the crane after damage. Therefore, seaport lighting with a long service life are needed. The theoretical lifespan of the lamps must reach at least 20 years.
3.High protection level
Because the port is in a humid environment all year round, the requirements for the waterproof and dustproof level of the lamps in such harsh environments are high. The high protection level lamps can prevent the seawater from evaporating into the lamp body and prolong the service life of the lamps. In addition, seawater is highly corrosive, and harbor lights must also have corrosion resistance characteristics.
Due to the various goods stacked on the port terminal, there are also some inflammable and explosive goods and cartons and plastic products used in packaging products. In addition, the seaport is located in a complex environment with high humidity and high corrosion. It is necessary to install safer and more reliable harbor lighting fixtures to ensure the lighting safety of the port terminal and prevent fire incidents caused by the short circuit of the fixtures.
Because port terminals often get fogged and the fog is relatively heavy, in order to meet the illumination and safety requirements of port terminal operations, harbor lights must have the characteristics of strong light penetration.
The area of the seaport is generally very large. For those seaports with huge cargo throughput, it is even more endless. The number of seaport lights it needs is unimaginable. Therefore, the seaport lighting must take into account the factor of energy saving.The use of internationally renowned brand lamp beads as the light source has low energy consumption and high luminous efficiency, saving a lot of maintenance costs for port terminals.
Why choose Hishine LED seaport lighting
Due to the huge seaport area and the high height of the gantry cranes, in order to carry out port operations safely and efficiently at night, it is necessary to choose high-illumination professional harbor lighting, because the cranes and ships are operating in the port when the brightness is not high. There will be errors in loading and unloading goods, which may cause serious safety accidents. The lumen output of Hishine's harbor lights can reach up to 208000lm. Such high lumen output can almost reach the same brightness as daytime.
2.IP67 waterproof and corrosion resistant
The seaport is facing a high humidity and high corrosion environment. If the general lighting fails to meet the requirements for waterproofing, it is easy to cause water damage to the lighting. Secondly, for general lamp body materials, especially mounting brackets, if they are exposed to high humidity and corrosive environment for a long time, they are likely to break and fall from a boom of tens of meters, causing serious accidents. Hishine designed and produced a professional harbor light with a waterproof level of IP67 in response to this characteristic of the harbor light. The material also uses high-strength and high-quality aluminum alloy materials.
3.Level 17 Typhoon Resistance
Because the harbor lights need to be installed on a boom of tens of meters, and due to the special geographical location of the harbor, the wind where the harbor lights are installed is very strong. If the mounting bracket cannot withstand the invasion of a super typhoon, then It will break and fall to the ground, causing serious losses and safety accidents.
For port operations, some places require lights with different light-emitting angles to meet different operating needs. For this, Hishine has specially developed four light-emitting angles, namely 15°, 30°, 45°, and 60°. The angle is sufficient to meet various lighting needs
5.Multiple installation methods
Port installation lamps are not completely traditional lighting installation methods. For the yard, the installation method of light poles is the most suitable, but for gantry cranes, this requires the lamps to be installed on the boom, and the boom is different The local installation method is sometimes different. Our harbor lights have three different installation methods, namely 360°rotating bracket, round pole bracket, u bracket. These three installation methods can be installed anywhere on the boom, which is flexible and convenient.
Our LED floodlights can be used not only as LED seaport lighting, harbor lights and container lights, but also as searchlights, and in the actual application process, the effect seems to be quite good, not only not inferior to high voltage in brightness Sodium lamp, and it beats traditional high pressure sodium lamp in energy saving.
7.Provide free lighting layout design
As a leader in the field of LED lighting , Hishine has many lighting engineers and rich lighting design experience. When necessary, we can provide our customers with free lighting design and provide references for customers' lighting design solutions.
If you are looking for high-quality port terminal lighting, please feel free to contact us at firstname.lastname@example.org, HISHINE's high-quality anti-corrosion LED floodlights, patented design and professional team will help you. We will reply you within 24 hours.