Four Tips Should be Paid Attention When Install LED Solar Street Light.

Everyone should be familiar with LED solar street lights, because of their advantages such as environmental protection and energy saving, they have always been favored by everyone. Many customers in Rongyun reported that there would be some failures in solar street lights. After understanding, they found that there were problems during installation. What should we pay attention to when installing led solar street lights?

1. Solar street lights should be installed on sunny days

According to relevant regulations, the batteries of solar street lights only save about 30% of the electricity when they leave the factory, so when installing solar street lights, it is best to choose Jingtian to install them. If it is installed on a rainy day, the solar street light can only be turned on with the power saved at the factory, which will not achieve the effect of the previous design.

2. The orientation of led solar street lights should be consistent

When installing solar street lights, remember to install the street lights in an unobstructed place, and the orientation of the solar street lights on both sides of the road must be the same. Remember not to face different places, because in this case, the solar street lights on one side will not be able to absorb enough energy. Sunlight. Generally, the bracket of the solar street light is designed with the best angle before leaving the factory, we only need to install the orientation of the solar street light correctly.

3. The wiring of solar street lights should distinguish the positive and negative poles

When installing solar street lights, we must clearly distinguish the positive and negative poles. We must clearly distinguish the positive and negative poles of the power board, light source and battery, and then install them in strict accordance with the relevant process instructions, so as to avoid solar street lights from not working.

4. The battery room of the led solar street light should be breathable and waterproof

The core of solar street lights is the battery, so the battery must be ventilated, that is, to dissipate heat. If it can't dissipate heat, it will greatly shorten the life of the battery. We must also pay attention to waterproof work, so as not to damage the batteries of solar street lights.